Reference Electrode Kit, Silver Pseudo, LowProfile, Varapor, 62 mm Long
This LowProfile, silver pseudo reference electrode kit is ideally used with the Honeycomb spectroelectrochemical cell kit. The low cost of these reference electrode kits make them ideal for any application, especially for use with non-aqueous electrochemistry. This electrode kit is most commonly constructed into a reversible chemistry reference electrode using different redox species, electrolytes, and solvents. In this way, it can be compatible with aqueous and/or non-aqueous solvent systems. More information on construction of a non-aqueous reference electrode is found below in the documents section. These non-aqueous reference electrode kits include: the cap assembly (Ag wire, PTFE cap, connection pin), glass tube, heat shrink tubing, and Varapor100 porous glass frit.
This product is available in related bundles. View related bundles in the tab below.
Customers must be logged into their account to view prices. Not all regions provide pricing online. If you do not see prices, you can obtain them from the designated sales channel in your region.
This LowProfile, silver pseudo reference electrode kit is ideally used with the Honeycomb spectroelectrochemical cell kit. The low cost of these reference electrode kits make them ideal for any application, especially for use with non-aqueous electrochemistry. This electrode kit is most commonly constructed into a reversible chemistry reference electrode using different redox species, electrolytes, and solvents. In this way, it can be compatible with aqueous and/or non-aqueous solvent systems. More information on construction of a non-aqueous reference electrode is found below in the documents section. These non-aqueous reference electrode kits include: the cap assembly (Ag wire, PTFE cap, connection pin), glass tube, heat shrink tubing, and Varapor100 porous glass frit.
The heat-shrink tubing required to hold Varapor100 frits in place may add more to the diameter than the hole may allow. When using a Varapor100 based product, you may have to install from the back/underside; or, you may have to insert through a 3.5 mm opening before attaching the Varapor100 with heat-shrink tubing.
