|Price in USD
|LowProfile Platinum Counter Electrode
LowProfile Platinum Counter Electrode
7 mm OD epoxy tube shroud, 65 mm long
WARNING: The black body of the electrode only has limited compatibility with organic solvents such as methylene chloride or DMF. Thus, try to immerse only the Pt coil in an organic electrolyte.
TEMPERATURE RANGE: 10°C - 25°C — Electrode damage may occur at temperatures beyond recommended range.
- Pt wire OD = 0.5 mm; approximate surface area = 0.58 cm2
- 7.0 mm OD x 65 mm epoxy tube shroud
- Compatible with our Low Volume Cells
See "Description" tab below for additional precautions and information.
WARNING: The black body of the electrode is made of epoxy, which will swell if soaked in organic or non-aqueous solvents such as methylene chloride or DMF. Try to avoid immerse the black epoxy body in the solvent electrolyte. Instead, immerse only the Pt coil in an organic electrolyte.
TEMPERATURE RANGE: 10°C – 25°C — Electrode damage may occur at temperatures beyond recommended range.
The electrode shroud is 7.0 mm OD x 65 mm long. Electrical connection is made via a 1.0 mm OD gold-plated pin at the top end of the electrode. This pin can accept an alligator clip or a small cable with an appropriately sized “pin and socket” connector.
Visit our YouTube channel for helpful instructional videos regarding the use and maintenance of this and many other Pine Research products!
All specifications are subject to change without notice.
Below are selected product references: