| # | Description | Price in USD | |
|---|---|---|---|
| Flow Cell Adapter | |||
| AC01HC0502 |
Malli Adapter for Flow Cell NOTE: The adapter does not include a headstage amplifier, electrode holder, or reference electrode connector. These are sold separately. |
||
| Optional Accessories | |||
| RRW108180 |
Banana-Banana Patch Cable |
||
| RRW57880 |
Alligator Clip |
||
| Headstage Amplifiers | |||
| AC01HS1 |
FSCV Headstage Amplifier NOTE: A working electrode driven systems means the waveform is applied to the working electrode, which is then later software subtracted. Such a design is consistent with the general FSCV research community. |
||
| AC01HS2 |
FSCV Headstage Amplifier NOTE: A working electrode driven systems means the waveform is applied to the working electrode, which is then later software subtracted. Such a design is consistent with the general FSCV research community. |
||
For compatibility with the ultra-flexible Pine Research Headstage Cable design and the new In-Vitro/FSCV Microelectrode Flow Cell, the Malli Adapter for Flow Cell accepts the Pine Research headstage amplifer, and maps the working electrode to the central pin of the BNC connector and the reference electrode to receptacles. Two receptacles for reference electrode are provided. Users may utilize 2 mm patch cable connections (to which an alligator clip can be connected for simple connection to reference electrode lead) or in the case where PCB pins are used, a port which accepts between 0.037" and 0.043" diameter pins can also be used. Connected to the Malli Adapter for Flow Cell is a standard stainless steel rod, which is 7.9 mm OD and 7.6 cm long and has a left-handed 8-32 threading at the open end. Therefore, the Malli Adapter for Flow Cell is directly compatible with the Pine Research In-Vitro/FSCV Microelectrode Flow Cell.
