Posted 1/4/2016 in Uncategorized

wavedriver_001.jpg
waveboth.jpg

Step 1

Contact Pine to download the new firmware. The firmware upgrade will be inside a ZIP file as shown below.

firmware_download.jpg

Step 2

Open the ZIP file and copy the firmware package to the Windows desktop (see below).

firmware_unpackage.jpg

Step 3

Double-click on the firmware package to launch the firmware update program (see below).
Make sure that the AfterMath application is NOT running and press the OK button.

firmware_launch.jpg

Step 4

Information about the firmware version is displayed for your review.
Press the OK button to install the new firmware in the potentiostat (see below).

firmware_confirm.jpg

Step 5

Wait for the firmware to be installed. This may take several seconds (see below).

firmware_transfer.jpg

Step 6

After the firmware is installed, the potentiostat will reset and the process is complete.
Note that the message “*** Receive timed out” (as shown below) is the normal response after the reset.
A dialog box confirming success will also appear (see below).

firmware_completed.jpg

Step 7

At this point, you can restart AfterMath and confirm that the correct firmware version has been installed (see below).

firmware_check_version.jpg

Additional Resources

Related Software Links: AfterMath Support Page, AfterMath User Guide, AfterMath Electrochemistry Guide, AfterMath Installation Guide

Related Hardware Links: WaveNow USB Potentiostat, WaveNano USB Potentiostat, WaveDriver USB Potentiostat