| # | Description | Price in USD | |
|---|---|---|---|
| Full Cell Kit | |||
| AF01CKT1008 |
Low Volume Separated H-Cell Kit |
||
| Individual Replacement Parts | |||
| RRPG258 |
Low Volume Separated Half Cell |
||
| AF01CKT1004 |
Low Volume Cell Series Cap Kit |
||
| RRPG261 |
Low Volume Cell Gas Inlet/Outlet |
||
| RRPG262 |
Low Volume Cell Gas Inlet/Outlet with Frit |
||
| Optional Tall Neck Cell | |||
| RRPG347 |
Low Volume Tall Neck Separated Half Cell |
||
| Optional Clamp for Thick Separators | |||
| AC01CKT1008S01 |
Thick Separator Clamp |
||
| Compatible Electrodes (Sold Separately) | |||
| LowProfile Working Electrodes | |||
| LowProfile Counter Electrode | |||
| LowProfile Reference Electrodes |
click here for compatible reference electrode information... |
||
| Optional Accessories | |||
| AKPURGE1 |
Purge Kit for 1/4" Tubing |
||
| AFEX194WH |
Utili-Shaft Style A Electrode Holder includes set screw and hex driver key; does not include o-ring |
||
| AFEX190STUB |
Utili-Shaft Style B Electrode Holder does not include o-ring or clip |
||
| RRPG371 |
Gas Bubbler/Humidifier |
||
A general purpose electrochemical cell designed for low volume applications where separation is desired between cell halves. In this design, the user supplies a membrane, polymer, or glass separator which is clamped between each cell half. The overall cell volume is 25 mL per side for a total volume of 50 mL. Each cell half can be used down to approximately 15 mL per side. The low volume glass cell is designed to accommodate our LowProfile working, counter, and reference electrodes. The cell kit(s) consists of the cell, the Low Volume Cell Cap Kit, and two gas purge/sparge tubes.
The Low Volume Cell Series is designed for use with:
- Our Low Volume Cap Kit, which can be used in two configurations - open or closed to the atmosphere. The cap kit seals around all electrodes and probes in the cell.
- The Pine Research miniature aqueous and non-aqueous reference electrodes. These electrodes are a perfect fit for the 3.5 mm OD hole in the Low Volume cell cap.
- Platinum, gold, or glassy carbon LowProfile working electrodes. These electrodes fit the larger bore holes in the Low Volume Cap Kit.
- Our LowProfile platinum counter electrode has a 7 mm OD for the larger bore holes in the Low Volume Cap Kit.
| Document # | Title |
|---|---|
| Product Information | |
|
DRK10163 |
LVC Membrane Cell Product Information |
|
DRP10065 |
Use and Assembly of the Low Volume Cells |
|
DRP10248 |
Use and Assembly of the Low Volume Cap Kit |
Contact us with any questions or support requests by phone or e-mail.
Below are selected product references:
| Low Volume Cell Series Cap Kit [AF01CKT1004] | |
